RigAtlas
My builds

Memory · MODEL NOTES

Kingston FURY Beast 32GB DDR4-3600 CL18

More DDR4 capacity without the taller Renegade heat spreader

Check with my buildRead the specifications ↓
The decision

FURY Beast KF436C18BBK2/32 provides 32 GB as two 16 GB modules with a 3600 CL18 profile and a 34 mm body. It is worth comparing when an existing DDR4 platform needs capacity and cooler clearance matters. The 3600 label does not by itself establish a better overall result than a stable 3200 kit; the CPU, board and applications decide whether tuning is worthwhile.

Consider it when

  • A supported DDR4 build that benefits from 32 GB and relatively short modules.

Look again when

  • The processor or board cannot reliably sustain the intended profile, or capacity is still insufficient.

THE SPACE IT NEEDS

Check the space under the cooler

34 mmPublished height
Original dimension guide. The primary dimension is scaled; other geometry is schematic.
Memory module height
34mm

Compare the module height with the cooler’s documented RAM clearance. A raised cooler fan may also need more space below the case side panel.

Check cooler and RAM clearance ↗

Based on the manufacturer specification record, checked . Check the exact revision and installation instructions before buying.

The checks that can change your choice

Compare the complete timing and clearance choice

The 3600 CL18 Beast and 3600 CL16 Renegade share a data-rate label but differ in latency settings and height. This exact Beast is 34 mm; the cataloged Renegade is 42.2 mm. Check the complete kit and cooler geometry before treating them as interchangeable.

Validate the kit, then the profile

Use the exact kit code in the board’s memory support list and install the matched modules in its recommended slots. First establish a stable default boot, then enable the supported profile and test memory. Mixing separate kits is not equivalent to buying one validated larger kit.

Published specifications

32 GB (2 × 16 GB); DDR4-3600 CL18; XMP 2.0; 34 mm height; KF436C18BBK2/32.

BrandKingston
Exact modelFURY Beast 32GB DDR4-3600 CL18
SKU / part numberKF436C18BBK2/32
Memory generationDDR4
Form factorUDIMM
Capacity32 GB
Modules in kit2
Advertised memory data rate3600 MT/s; profile and platform support must be checked
Memory module height34 mm

Listed speed is a tested memory profile, not guaranteed default speed. Check the exact kit SKU against the motherboard QVL, CPU memory limits, BIOS version and cooler clearance.

Catalog record checked . Manufacturer specifications. The individual references below show the dates used for these model notes.

A different choice worth checking

Kingston FURY Renegade 32GB DDR4-3600 CL16The 32 GB FURY Renegade kit is a candidate for a supported DDR4 system where the owner deliberately wants to compare its 3600 CL16 profile with more modest alternatives. Its capacity is the same as the 32 GB Beast options, so it does not solve a capacity shortfall. Treat lower timing numbers as a tuning consideration, not a promised application or gaming improvement.Read this model’s tradeoffs ↗CORSAIR VENGEANCE LPX 32GB DDR4-3200 CL16VENGEANCE LPX CMK32GX4M2E3200C16 is a two-module 32 GB option for a DDR4 system that runs short of memory before it runs short of CPU performance. Replacing a smaller kit can be cleaner than trying to combine unrelated modules. For a new computer, compare total CPU, board and RAM cost before making DDR4 reuse the deciding factor.Read this model’s tradeoffs ↗Kingston FURY Beast 64GB DDR4-3200 CL16This 64 GB FURY Beast kit is a capacity upgrade for supported DDR4 systems running large projects, virtual machines or several demanding applications. Two 32 GB modules can be a more deliberate choice than combining two smaller kits. Buy that capacity because the workload needs it; it will not automatically improve tasks that already fit comfortably in 32 GB.Read this model’s tradeoffs ↗

These alternatives address related choices. Recheck their platform, connections and fit before treating one as a replacement.

Follow the check that matters to your build

Sources and review notes

RigAtlas connects manufacturer specifications to component choices. This page is document-based analysis; it does not claim a hands-on test or a current store offer.

How we use sources · Report a correction

See how it fits your list.

Review this component with your existing selections before making the change.

Check with my build