Case · MODEL NOTES
LIAN LI LANCOOL 207 Black (LAN207RX)
A compact ATX layout that moves the PSU decision to the front of the build.
LANCOOL 207 fits an ATX build into a more compact arrangement by making specific choices about board width and PSU placement. Its four included fans are a useful starting point. Decide on the power supply, cable routing and drive count early; those details matter more here than simply checking that the board says ATX.
Consider it when
- An ATX motherboard no wider than 244 mm.
- A compact tower plan with a short PSU and checked CPU-power cable route.
Look again when
- A 160 mm PSU assumed safe at the stated under-160 mm limit.
- A storage plan expecting two HDDs and two SSDs from two shared mounts.
The checks that can change your choice
Front PSU placement affects cables
Verify PSU orientation, connectors and the EPS cable route to the motherboard. Allow usable cable length and bend space rather than comparing only the metal PSU enclosure with the nominal length limit.
Shared positions are alternatives
The two 2.5/3.5-inch drive positions accept alternative drive types. Likewise, fan and radiator positions overlap: count the hardware in the final arrangement instead of adding every advertised position together.
Published specifications
Compact ATX case; GPU up to 375 mm; CPU cooler up to 180 mm; top 240/280/360 mm radiator; four fans included; two shared 2.5/3.5-inch drive mounts.
| Brand | LIAN LI |
|---|---|
| Exact model | LANCOOL 207 Black (LAN207RX) |
| Manufacturer model number | LAN207RX |
| Form factor | Mid-tower |
| Case motherboard support | ATX, micro-ATX, Mini-ITX |
| Case motherboard width limit | Up to 244 mm; check the exact board width, not only its format name |
| Case GPU length limit | 375 mm; cooling and layout can reduce this |
| Case CPU cooler height limit | 180 mm |
| Case PSU formats | ATX |
| Case PSU length limit | 160 mm; allow cable and drive-cage space |
| PSU limit condition | PSU length must be strictly below the stated limit. |
| Radiator mount: top / 240 mm | Offset motherboard tray; final fan/radiator stack and header clearance require review. |
| Radiator mount: top / 280 mm | Offset motherboard tray; final fan/radiator stack and header clearance require review. |
| Radiator mount: top / 360 mm | Offset motherboard tray; final fan/radiator stack and header clearance require review. |
| Drive mount shared | 2 shared position(s) for 2.5 inch or 3.5 inch; sizes within this group use the same positions |
| Fan mount: front / 140 mm | 2 positions; 2 fan(s) included; Front replacements must not be wider than 140mm; included fans are 30mm thick. |
| Fan mount: top / 120 mm | 3 positions; 0 fan(s) included; Shares positions with top radiator.; shares positions with another size or arrangement |
| Fan mount: top / 140 mm | 2 positions; 0 fan(s) included; Alternative to three 120mm fans; shares radiator positions.; shares positions with another size or arrangement |
| Fan mount: psu-shroud / 120 mm | 2 positions; 2 fan(s) included |
| Fan mount: rear / 120 mm | 1 positions; 0 fan(s) included |
PSU support is stated as under 160mm, not an unconditional fit at exactly 160mm. ATX motherboard width must not exceed 244mm. Front PSU layout requires checking EPS routing, PSU orientation and connector clearance. Two shared drive mounts cannot hold two HDDs plus two SSDs simultaneously. Radiator and fan positions overlap.
A different choice worth checking
These alternatives address related choices. Recheck their platform, connections and fit before treating one as a replacement.
Follow the check that matters to your build
Sources and review notes
RigAtlas connects manufacturer specifications to component choices. This page is document-based analysis; it does not claim a hands-on test or a current store offer.
- LIAN LI — exact model specificationsEvidence checked
See how it fits your list.
Review this component with your existing selections before making the change.