RigAtlas
My builds

Memory · MODEL NOTES

G.SKILL Flare X5 32GB DDR5-6000 CL30

A lower-height 32 GB DDR5 alternative for tight air-cooler layouts

Check with my buildRead the specifications ↓
The decision

Flare X5 F5-6000J3038F16GX2-FX5 is worth comparing when 32 GB is sufficient and the cooler’s front fan sits close to the memory. Its recorded 33 mm height is a useful physical distinction from taller kits. Choose it by exact board support and installed clearance; a similar 6000 CL30 label on another kit does not establish identical behavior.

Consider it when

  • A supported two-module DDR5 build with limited clearance beneath an overhanging cooler.

Look again when

  • You need more than 32 GB or are assuming low height guarantees the complete cooler will fit.

THE SPACE IT NEEDS

Check the space under the cooler

33 mmPublished height
Original dimension guide. The primary dimension is scaled; other geometry is schematic.
Memory module height
33mm

Compare the module height with the cooler’s documented RAM clearance. A raised cooler fan may also need more space below the case side panel.

Check cooler and RAM clearance ↗

Based on the manufacturer specification record, checked . Check the exact revision and installation instructions before buying.

The checks that can change your choice

Separate the stored default from the advertised profile

The catalog records DDR5-4800 SPD and a 6000 CL30 profile at 1.35 V for this exact kit. Check the full timing code and QVL rather than assuming the advertised rate is the initial boot speed. Any cooler-fan adjustment must also remain within the case height limit.

Validate the kit, then the profile

Use the exact kit code in the board’s memory support list and install the matched modules in its recommended slots. First establish a stable default boot, then enable the supported profile and test memory. Mixing separate kits is not equivalent to buying one validated larger kit.

Published specifications

32 GB (2 x 16 GB); DDR5 UDIMM; up to 6000 MT/s; CL30-38-38-96 at 1.35 V; XMP 3.0 / AMD EXPO; 33 mm module height.

BrandG.SKILL
Exact modelFlare X5 32GB DDR5-6000 CL30
SKU / part numberF5-6000J3038F16GX2-FX5
Memory generationDDR5
Form factorUDIMM
Capacity32 GB
Modules in kit2
Advertised memory data rate6000 MT/s; profile and platform support must be checked
Memory module height33 mm

Rated 6000 MT/s is an overclock profile, not a universal CPU/board guarantee. Default SPD speed is 4800 MT/s. Verify the exact kit against the motherboard QVL and do not mix kits.

Catalog record checked . Manufacturer specifications. The individual references below show the dates used for these model notes.

A different choice worth checking

TEAMGROUP T-CREATE EXPERT Black 32GB DDR5-6000 CL30T-CREATE EXPERT CTCED532G6000HC30DC01 is a 32 GB DDR5 option whose 32 mm height makes it worth considering under large air coolers. The understated module design is an aesthetic choice; the useful purchase criteria remain capacity, exact profile support and physical fit. Compare it with other 6000 CL30 kits using the board’s evidence rather than treating their headline specifications as interchangeable.Read this model’s tradeoffs ↗Kingston FURY Beast 32GB DDR5-6000 CL30Decide whether 32 GB meets your workload first. Then verify the exact kit on the intended board and check cooler clearance. Buying a faster profile is not a substitute for identifying why the current PC slows down.Read this model’s tradeoffs ↗CORSAIR VENGEANCE 32GB DDR5-6000 CL30This VENGEANCE kit is a sensible 32 GB comparison point when two 16 GB modules cover the workload and the board supports the exact CMK32GX5M2B6000Z30 code. Its 35 mm height can simplify a tower-cooler layout. Choose it for capacity, fit and a validated configuration; the advertised 6000 MT/s is a profile target rather than the speed every machine will select automatically.Read this model’s tradeoffs ↗

These alternatives address related choices. Recheck their platform, connections and fit before treating one as a replacement.

Follow the check that matters to your build

Sources and review notes

RigAtlas connects manufacturer specifications to component choices. This page is document-based analysis; it does not claim a hands-on test or a current store offer.

How we use sources · Report a correction

See how it fits your list.

Review this component with your existing selections before making the change.

Check with my build