RigAtlas
My builds

Memory · MODEL NOTES

TEAMGROUP T-CREATE EXPERT Black 32GB DDR5-6000 CL30

A short DDR5 kit when quiet, uncomplicated packaging suits the build

Check with my buildRead the specifications ↓
The decision

T-CREATE EXPERT CTCED532G6000HC30DC01 is a 32 GB DDR5 option whose 32 mm height makes it worth considering under large air coolers. The understated module design is an aesthetic choice; the useful purchase criteria remain capacity, exact profile support and physical fit. Compare it with other 6000 CL30 kits using the board’s evidence rather than treating their headline specifications as interchangeable.

Consider it when

  • A supported DDR5 tower where low module height helps preserve cooler-fan position.

Look again when

  • The workload needs more capacity or the selected board lacks suitable kit validation.

THE SPACE IT NEEDS

Check the space under the cooler

32 mmPublished height
Original dimension guide. The primary dimension is scaled; other geometry is schematic.
Memory module height
32mm

Compare the module height with the cooler’s documented RAM clearance. A raised cooler fan may also need more space below the case side panel.

Check cooler and RAM clearance ↗

Based on the manufacturer specification record, checked . Check the exact revision and installation instructions before buying.

The checks that can change your choice

Check the full black-kit code

This exact kit is 2 × 16 GB, 6000 CL30 at 1.35 V, with XMP/EXPO recorded in the catalog. Other EXPERT capacities and timing variants share the family name. Keep CTCED532G6000HC30DC01 in the parts list and check the complete cooler-and-case clearance.

Validate the kit, then the profile

Use the exact kit code in the board’s memory support list and install the matched modules in its recommended slots. First establish a stable default boot, then enable the supported profile and test memory. Mixing separate kits is not equivalent to buying one validated larger kit.

Published specifications

32 GB (2 x 16 GB); DDR5 UDIMM; up to 6000 MT/s CL30; 1.35 V; XMP 3.0 / AMD EXPO; 32 mm module height.

BrandTEAMGROUP
Exact modelT-CREATE EXPERT Black 32GB DDR5-6000 CL30
SKU / part numberCTCED532G6000HC30DC01
Memory generationDDR5
Form factorUDIMM
Capacity32 GB
Modules in kit2
Advertised memory data rate6000 MT/s; profile and platform support must be checked
Memory module height32 mm

Use the exact kit SKU in the QVL. 6000 MT/s requires a supported memory profile and BIOS configuration; CPU and motherboard limits may require a lower speed.

Catalog record checked . Manufacturer specifications. The individual references below show the dates used for these model notes.

A different choice worth checking

G.SKILL Flare X5 32GB DDR5-6000 CL30Flare X5 F5-6000J3038F16GX2-FX5 is worth comparing when 32 GB is sufficient and the cooler’s front fan sits close to the memory. Its recorded 33 mm height is a useful physical distinction from taller kits. Choose it by exact board support and installed clearance; a similar 6000 CL30 label on another kit does not establish identical behavior.Read this model’s tradeoffs ↗CORSAIR VENGEANCE 32GB DDR5-6000 CL30This VENGEANCE kit is a sensible 32 GB comparison point when two 16 GB modules cover the workload and the board supports the exact CMK32GX5M2B6000Z30 code. Its 35 mm height can simplify a tower-cooler layout. Choose it for capacity, fit and a validated configuration; the advertised 6000 MT/s is a profile target rather than the speed every machine will select automatically.Read this model’s tradeoffs ↗TEAMGROUP T-CREATE EXPERT Black 48GB DDR5-6000 CL28The 48 GB T-CREATE EXPERT kit can suit a workload that outgrows 32 GB without needing 64 GB. It keeps a 6000 MT/s target while offering a CL28 profile and a short 32 mm body. The capacity decision should come first: tighter timings do not substitute for enough RAM, and the platform still needs to support two 24 GB modules.Read this model’s tradeoffs ↗

These alternatives address related choices. Recheck their platform, connections and fit before treating one as a replacement.

Follow the check that matters to your build

Sources and review notes

RigAtlas connects manufacturer specifications to component choices. This page is document-based analysis; it does not claim a hands-on test or a current store offer.

How we use sources · Report a correction

See how it fits your list.

Review this component with your existing selections before making the change.

Check with my build