RigAtlas
My builds

Memory · MODEL NOTES

TEAMGROUP T-CREATE EXPERT Black 48GB DDR5-6000 CL28

A middle capacity step without moving to a very high data-rate profile

Check with my buildRead the specifications ↓
The decision

The 48 GB T-CREATE EXPERT kit can suit a workload that outgrows 32 GB without needing 64 GB. It keeps a 6000 MT/s target while offering a CL28 profile and a short 32 mm body. The capacity decision should come first: tighter timings do not substitute for enough RAM, and the platform still needs to support two 24 GB modules.

Consider it when

  • A supported DDR5 workstation needing more than 32 GB and limited cooler clearance.

Look again when

  • You require 64 GB or are choosing by a retailer’s mixed-variant product title.

THE SPACE IT NEEDS

Check the space under the cooler

32 mmPublished height
Original dimension guide. The primary dimension is scaled; other geometry is schematic.
Memory module height
32mm

Compare the module height with the cooler’s documented RAM clearance. A raised cooler fan may also need more space below the case side panel.

Check cooler and RAM clearance ↗

Based on the manufacturer specification record, checked . Check the exact revision and installation instructions before buying.

The checks that can change your choice

The exact table row matters more than a family-page title

CTCED548G6000HC28BDC01 identifies the 2 × 24 GB 6000 CL28 kit. The catalog’s source warning notes a product page titled for a different 7200 CL34 variant. Check this exact code in the specification table, BIOS density support and QVL before applying its profile.

Validate the kit, then the profile

Use the exact kit code in the board’s memory support list and install the matched modules in its recommended slots. First establish a stable default boot, then enable the supported profile and test memory. Mixing separate kits is not equivalent to buying one validated larger kit.

Published specifications

48 GB (2 x 24 GB); DDR5 UDIMM; up to 6000 MT/s CL28; 1.35 V; XMP 3.0 / AMD EXPO; 32 mm module height.

BrandTEAMGROUP
Exact modelT-CREATE EXPERT Black 48GB DDR5-6000 CL28
SKU / part numberCTCED548G6000HC28BDC01
Memory generationDDR5
Form factorUDIMM
Capacity48 GB
Modules in kit2
Advertised memory data rate6000 MT/s; profile and platform support must be checked
Memory module height32 mm

Exact 6000 CL28 kit SKU is listed in the manufacturer's series specification table; the linked product page contains other variants as well. Match CTCED548G6000HC28BDC01, not the 7200 CL34 kit in its page title. Check 24 GB DIMM support, BIOS and QVL; the profile speed is not guaranteed on every system.

Catalog record checked . Manufacturer specifications. The individual references below show the dates used for these model notes.

A different choice worth checking

Kingston FURY Renegade 48GB DDR5-7200 CL38This Renegade kit sits between common 32 GB and 64 GB capacities while targeting a DDR5-7200 profile. It can be attractive when 48 GB is enough for the workload and the exact platform has suitable validation. Separate those two reasons to buy: you may benefit from more memory while gaining little from the higher data rate, or need a lower profile for stability.Read this model’s tradeoffs ↗Kingston FURY Beast 64GB DDR5-6000 CL30The 64 GB FURY Beast kit is most relevant when real project sizes or concurrent workloads exceed what a 32 GB system can comfortably hold. It provides two 32 GB modules rather than requiring four smaller modules. That makes a clean capacity plan, but the memory controller still has to support those modules and the selected profile; do not infer stability from a smaller kit’s result.Read this model’s tradeoffs ↗TEAMGROUP T-CREATE EXPERT Black 32GB DDR5-6000 CL30T-CREATE EXPERT CTCED532G6000HC30DC01 is a 32 GB DDR5 option whose 32 mm height makes it worth considering under large air coolers. The understated module design is an aesthetic choice; the useful purchase criteria remain capacity, exact profile support and physical fit. Compare it with other 6000 CL30 kits using the board’s evidence rather than treating their headline specifications as interchangeable.Read this model’s tradeoffs ↗

These alternatives address related choices. Recheck their platform, connections and fit before treating one as a replacement.

Follow the check that matters to your build

Sources and review notes

RigAtlas connects manufacturer specifications to component choices. This page is document-based analysis; it does not claim a hands-on test or a current store offer.

How we use sources · Report a correction

See how it fits your list.

Review this component with your existing selections before making the change.

Check with my build