RigAtlas
My builds

Memory · MODEL NOTES

Kingston FURY Renegade 48GB DDR5-7200 CL38

A high-profile-speed kit that also changes the capacity decision

Check with my buildRead the specifications ↓
The decision

This Renegade kit sits between common 32 GB and 64 GB capacities while targeting a DDR5-7200 profile. It can be attractive when 48 GB is enough for the workload and the exact platform has suitable validation. Separate those two reasons to buy: you may benefit from more memory while gaining little from the higher data rate, or need a lower profile for stability.

Consider it when

  • A validated two-DIMM platform where 48 GB is useful and profile testing is acceptable.

Look again when

  • The system requires effortless high-capacity stability or lacks support for 24 GB DIMMs.

THE SPACE IT NEEDS

Check the space under the cooler

39.2 mmPublished height
Original dimension guide. The primary dimension is scaled; other geometry is schematic.
Memory module height
39.2mm

Compare the module height with the cooler’s documented RAM clearance. A raised cooler fan may also need more space below the case side panel.

Check cooler and RAM clearance ↗

Based on the manufacturer specification record, checked . Check the exact revision and installation instructions before buying.

The checks that can change your choice

Check 24 GB modules and the 7200 profile together

KF572C38RSK2-48 contains 2 × 24 GB, uses XMP 3.0 and stands 39.2 mm tall. CPU support for DDR5 alone does not validate this density at 7200 MT/s. Check the board’s exact kit population and keep a known-stable recovery configuration.

Validate the kit, then the profile

Use the exact kit code in the board’s memory support list and install the matched modules in its recommended slots. First establish a stable default boot, then enable the supported profile and test memory. Mixing separate kits is not equivalent to buying one validated larger kit.

Published specifications

48 GB (2 × 24 GB); DDR5-7200 CL38; XMP 3.0; 39.2 mm height; KF572C38RSK2-48.

BrandKingston
Exact modelFURY Renegade 48GB DDR5-7200 CL38
SKU / part numberKF572C38RSK2-48
Memory generationDDR5
Form factorUDIMM
Capacity48 GB
Modules in kit2
Advertised memory data rate7200 MT/s; profile and platform support must be checked
Memory module height39.2 mm

Listed speed is a tested memory profile, not guaranteed default speed. Check the exact kit SKU against the motherboard QVL, CPU memory limits, BIOS version and cooler clearance.

Catalog record checked . Manufacturer specifications. The individual references below show the dates used for these model notes.

A different choice worth checking

TEAMGROUP T-CREATE EXPERT Black 48GB DDR5-6000 CL28The 48 GB T-CREATE EXPERT kit can suit a workload that outgrows 32 GB without needing 64 GB. It keeps a 6000 MT/s target while offering a CL28 profile and a short 32 mm body. The capacity decision should come first: tighter timings do not substitute for enough RAM, and the platform still needs to support two 24 GB modules.Read this model’s tradeoffs ↗Kingston FURY Beast 64GB DDR5-6000 CL30The 64 GB FURY Beast kit is most relevant when real project sizes or concurrent workloads exceed what a 32 GB system can comfortably hold. It provides two 32 GB modules rather than requiring four smaller modules. That makes a clean capacity plan, but the memory controller still has to support those modules and the selected profile; do not infer stability from a smaller kit’s result.Read this model’s tradeoffs ↗Kingston FURY Beast 32GB DDR5-6400 CL32The 32 GB DDR5-6400 CL32 Beast kit is worth comparing when the platform has clear support for that profile and you want to evaluate memory tuning deliberately. Its capacity remains 32 GB, so it does not fix swapping caused by an oversized workload. A stable lower-speed kit with enough capacity can be the more useful purchase than a higher number that needs extensive adjustment.Read this model’s tradeoffs ↗

These alternatives address related choices. Recheck their platform, connections and fit before treating one as a replacement.

Follow the check that matters to your build

Sources and review notes

RigAtlas connects manufacturer specifications to component choices. This page is document-based analysis; it does not claim a hands-on test or a current store offer.

How we use sources · Report a correction

See how it fits your list.

Review this component with your existing selections before making the change.

Check with my build