Memory · MODEL NOTES

Kingston FURY Beast 64GB DDR5-6000 CL30

Double the useful capacity before chasing a faster profile

The decision

The 64 GB FURY Beast kit is most relevant when real project sizes or concurrent workloads exceed what a 32 GB system can comfortably hold. It provides two 32 GB modules rather than requiring four smaller modules. That makes a clean capacity plan, but the memory controller still has to support those modules and the selected profile; do not infer stability from a smaller kit’s result.

Consider it when

  • A supported DDR5 workstation with measured memory pressure or larger working datasets.

Look again when

  • The extra capacity will stay unused or a board only validates a different kit population.

THE SPACE IT NEEDS

Check the space under the cooler

34.9 mmPublished height
Original dimension guide. The primary dimension is scaled; other geometry is schematic.
Memory module height
34.9mm

Compare the module height with the cooler’s documented RAM clearance. A raised cooler fan may also need more space below the case side panel.

Check cooler and RAM clearance ↗

Based on the manufacturer specification record, checked . Check the exact revision and installation instructions before buying.

The checks that can change your choice

Validate the 64 GB code independently

KF560C30BBEK2-64 has the same advertised 6000 CL30 target as a smaller Beast kit, but it uses 32 GB DIMMs. Confirm this exact code and density in the board’s evidence, then test the complete workload. Its listed 34.9 mm height still needs a cooler-clearance check.

Validate the kit, then the profile

Use the exact kit code in the board’s memory support list and install the matched modules in its recommended slots. First establish a stable default boot, then enable the supported profile and test memory. Mixing separate kits is not equivalent to buying one validated larger kit.

Published specifications

64 GB (2 × 32 GB); DDR5-6000 CL30; AMD EXPO and XMP 3.0; 34.9 mm height; KF560C30BBEK2-64.

BrandKingston
Exact modelFURY Beast 64GB DDR5-6000 CL30
SKU / part numberKF560C30BBEK2-64
Memory generationDDR5
Form factorUDIMM
Capacity64 GB
Modules in kit2
Advertised memory data rate6000 MT/s; profile and platform support must be checked
Memory module height34.9 mm

Listed speed is a tested memory profile, not guaranteed default speed. Check the exact kit SKU against the motherboard QVL, CPU memory limits, BIOS version and cooler clearance.

Compare the choice, not just the name

A different choice worth checking

These alternatives address related choices. Recheck their platform, connections and fit before treating one as a replacement.

Parts lists using this exact model

These lists show the surrounding components and the tradeoffs. They are editable planning examples, not measured systems.

Follow the check that matters to your build

Sources and review notes

RigAtlas connects manufacturer specifications to component choices. This page is document-based analysis; it does not claim a hands-on test or a current store offer.

How we use sources · Report a correction

See how it fits your list.

Review this component with your existing selections before making the change.

Check with my build