RigAtlas
My builds

Memory · MODEL NOTES

Kingston FURY Beast 32GB DDR5-6000 CL30

KF560C30BBEK2-32 is a matched two-module 32 GB kit. Capacity, the 6000 MT/s profile and its physical height answer different questions; checking only one of them can leave an otherwise sensible build with a problem.

Check with my buildRead the specifications ↓
The decision

Decide whether 32 GB meets your workload first. Then verify the exact kit on the intended board and check cooler clearance. Buying a faster profile is not a substitute for identifying why the current PC slows down.

Consider it when

  • Your usual workload fits a 32 GB plan and the motherboard uses desktop DDR5 memory.
  • You can install the two modules in the board-recommended slots, verify stable default operation and then evaluate the supported memory profile.

Look again when

  • You are keeping a DDR4 motherboard. This kit cannot be installed in its memory slots.
  • You already see a capacity limit above 32 GB or intend to buy a second kit immediately. Plan the final DIMM population and board support before ordering.

THE SPACE IT NEEDS

Check the space under the cooler

34.9 mmPublished height
Original dimension guide. The primary dimension is scaled; other geometry is schematic.
Memory module height
34.9mm

Compare the module height with the cooler’s documented RAM clearance. A raised cooler fan may also need more space below the case side panel.

Check cooler and RAM clearance ↗

Based on the manufacturer specification record, checked . Check the exact revision and installation instructions before buying.

The checks that can change your choice

Distinguish the default from the profile

The datasheet lists DDR5-4800 CL40 at 1.1 V as the default, and DDR5-6000 CL30 at 1.4 V as an EXPO/XMP profile. An initial boot below 6000 is not, by itself, evidence of a faulty kit.

Check the manufacturer document ↗

Check SKU and DIMM population

The kit contains two 16 GB modules. Check KF560C30BBEK2-32 against the board QVL and CPU memory requirements. Do not assume two separately purchased kits will reproduce the validated two-module profile.

Check the manufacturer document ↗

Include the heat spreader in cooler fit

Kingston gives a 34.9 mm height. A cooler front fan can overlap it even when the memory fits the motherboard. For an NH-D15, use the current fan-height guidance and your case limit before declaring the combination compatible.

Check the manufacturer document ↗

Published specifications

32 GB (2 × 16 GB); DDR5-6000 CL30; AMD EXPO and XMP 3.0; 34.9 mm height; KF560C30BBEK2-32.

BrandKingston
Exact modelFURY Beast 32GB DDR5-6000 CL30
SKU / part numberKF560C30BBEK2-32
Memory generationDDR5
Form factorUDIMM
Capacity32 GB
Modules in kit2
Advertised memory data rate6000 MT/s; profile and platform support must be checked
Memory module height34.9 mm

Listed speed is a tested memory profile, not guaranteed default speed. Check the exact kit SKU against the motherboard QVL, CPU memory limits, BIOS version and cooler clearance.

Catalog record checked . Manufacturer specifications. The individual references below show the dates used for these model notes.

Compare the choice, not just the name

Kingston FURY Beast 32GB vs 64GB DDR5-6000 CL30: buy capacity for a taskCompare the exact KF560C30BBEK2-32 and KF560C30BBEK2-64 kits: capacity, two-DIMM installation, cooler clearance and memory-profile limits.Read the comparison ↗

A different choice worth checking

CORSAIR VENGEANCE 32GB DDR5-6000 CL30This VENGEANCE kit is a sensible 32 GB comparison point when two 16 GB modules cover the workload and the board supports the exact CMK32GX5M2B6000Z30 code. Its 35 mm height can simplify a tower-cooler layout. Choose it for capacity, fit and a validated configuration; the advertised 6000 MT/s is a profile target rather than the speed every machine will select automatically.Read this model’s tradeoffs ↗G.SKILL Flare X5 32GB DDR5-6000 CL30Flare X5 F5-6000J3038F16GX2-FX5 is worth comparing when 32 GB is sufficient and the cooler’s front fan sits close to the memory. Its recorded 33 mm height is a useful physical distinction from taller kits. Choose it by exact board support and installed clearance; a similar 6000 CL30 label on another kit does not establish identical behavior.Read this model’s tradeoffs ↗Kingston FURY Beast 64GB DDR5-6000 CL30The 64 GB FURY Beast kit is most relevant when real project sizes or concurrent workloads exceed what a 32 GB system can comfortably hold. It provides two 32 GB modules rather than requiring four smaller modules. That makes a clean capacity plan, but the memory controller still has to support those modules and the selected profile; do not infer stability from a smaller kit’s result.Read this model’s tradeoffs ↗

These alternatives address related choices. Recheck their platform, connections and fit before treating one as a replacement.

Parts lists using this exact model

These lists show the surrounding components and the tradeoffs. They are editable planning examples, not measured systems.

Follow the check that matters to your build

Sources and review notes

RigAtlas connects manufacturer specifications to component choices. This page is document-based analysis; it does not claim a hands-on test or a current store offer.

How we use sources · Report a correction

See how it fits your list.

Review this component with your existing selections before making the change.

Check with my build