RigAtlas
My builds

Memory · MODEL NOTES

Kingston FURY Renegade 96GB DDR5-6000 CL32

Two 48 GB modules for genuinely large memory workloads

Check with my buildRead the specifications ↓
The decision

FURY Renegade KF560C32RSK2-96 is a deliberate workstation capacity choice for large datasets, VMs or projects that exceed 64 GB. Its two-module arrangement is useful where four DIMMs are undesirable or unavailable. It is not a blanket upgrade for gaming: establishing that the workload needs the capacity matters more than selecting the largest kit the catalog offers.

Consider it when

  • A memory-heavy DDR5 workstation with explicit support for 48 GB DIMMs.

Look again when

  • The motherboard firmware predates the required density support or the workload fits in a smaller kit.

THE SPACE IT NEEDS

Check the space under the cooler

39.2 mmPublished height
Original dimension guide. The primary dimension is scaled; other geometry is schematic.
Memory module height
39.2mm

Compare the module height with the cooler’s documented RAM clearance. A raised cooler fan may also need more space below the case side panel.

Check cooler and RAM clearance ↗

Based on the manufacturer specification record, checked . Check the exact revision and installation instructions before buying.

The checks that can change your choice

48 GB DIMM support is a separate requirement

The exact kit is 2 × 48 GB, DDR5-6000 CL32, XMP 3.0 and 39.2 mm tall. Check CPU and BIOS support for that density, the exact QVL entry and cooler height. Do not assume EXPO is included just because other Kingston 6000 kits advertise it.

Validate the kit, then the profile

Use the exact kit code in the board’s memory support list and install the matched modules in its recommended slots. First establish a stable default boot, then enable the supported profile and test memory. Mixing separate kits is not equivalent to buying one validated larger kit.

Published specifications

96 GB (2 × 48 GB); DDR5-6000 CL32; XMP 3.0; 39.2 mm height; KF560C32RSK2-96.

BrandKingston
Exact modelFURY Renegade 96GB DDR5-6000 CL32
SKU / part numberKF560C32RSK2-96
Memory generationDDR5
Form factorUDIMM
Capacity96 GB
Modules in kit2
Advertised memory data rate6000 MT/s; profile and platform support must be checked
Memory module height39.2 mm

Listed speed is a tested memory profile, not guaranteed default speed. Check the exact kit SKU against the motherboard QVL, CPU memory limits, BIOS version and cooler clearance.

Catalog record checked . Manufacturer specifications. The individual references below show the dates used for these model notes.

A different choice worth checking

Kingston FURY Beast 64GB DDR5-6000 CL30The 64 GB FURY Beast kit is most relevant when real project sizes or concurrent workloads exceed what a 32 GB system can comfortably hold. It provides two 32 GB modules rather than requiring four smaller modules. That makes a clean capacity plan, but the memory controller still has to support those modules and the selected profile; do not infer stability from a smaller kit’s result.Read this model’s tradeoffs ↗TEAMGROUP T-CREATE EXPERT Black 48GB DDR5-6000 CL28The 48 GB T-CREATE EXPERT kit can suit a workload that outgrows 32 GB without needing 64 GB. It keeps a 6000 MT/s target while offering a CL28 profile and a short 32 mm body. The capacity decision should come first: tighter timings do not substitute for enough RAM, and the platform still needs to support two 24 GB modules.Read this model’s tradeoffs ↗Kingston FURY Renegade 48GB DDR5-7200 CL38This Renegade kit sits between common 32 GB and 64 GB capacities while targeting a DDR5-7200 profile. It can be attractive when 48 GB is enough for the workload and the exact platform has suitable validation. Separate those two reasons to buy: you may benefit from more memory while gaining little from the higher data rate, or need a lower profile for stability.Read this model’s tradeoffs ↗

These alternatives address related choices. Recheck their platform, connections and fit before treating one as a replacement.

Parts lists using this exact model

These lists show the surrounding components and the tradeoffs. They are editable planning examples, not measured systems.

Follow the check that matters to your build

Sources and review notes

RigAtlas connects manufacturer specifications to component choices. This page is document-based analysis; it does not claim a hands-on test or a current store offer.

How we use sources · Report a correction

See how it fits your list.

Review this component with your existing selections before making the change.

Check with my build