RigAtlas
My builds

Memory · MODEL NOTES

Kingston FURY Renegade 32GB DDR5-8000 CL38

A specialist memory-tuning choice with little tolerance for assumptions

Check with my buildRead the specifications ↓
The decision

FURY Renegade KF580C38RSK2-32 targets a high 8000 MT/s XMP profile, making platform validation the first question. It still holds 32 GB, so the purchase is about a supported tuning objective rather than additional working capacity. Consider it only after checking the exact board and processor evidence and accepting that stable operation may require a lower setting.

Consider it when

  • A deliberately validated DDR5 tuning build with time for thorough stability testing.

Look again when

  • You mainly need more capacity, a simple setup, or guaranteed profile speed.

THE SPACE IT NEEDS

Check the space under the cooler

39.2 mmPublished height
Original dimension guide. The primary dimension is scaled; other geometry is schematic.
Memory module height
39.2mm

Compare the module height with the cooler’s documented RAM clearance. A raised cooler fan may also need more space below the case side panel.

Check cooler and RAM clearance ↗

Based on the manufacturer specification record, checked . Check the exact revision and installation instructions before buying.

The checks that can change your choice

The exact kit is 2 × 16 GB despite a source-text error

The catalog records a per-module description typo in the manufacturer PDF; the heading and memory organization identify a 32 GB two-module kit. Check the box code, 39.2 mm height and exact QVL entry. Do not use the typo or the 8000 label to infer a different capacity.

Validate the kit, then the profile

Use the exact kit code in the board’s memory support list and install the matched modules in its recommended slots. First establish a stable default boot, then enable the supported profile and test memory. Mixing separate kits is not equivalent to buying one validated larger kit.

Published specifications

32 GB (2 × 16 GB); DDR5-8000 CL38; XMP 3.0; 39.2 mm height; KF580C38RSK2-32.

BrandKingston
Exact modelFURY Renegade 32GB DDR5-8000 CL38
SKU / part numberKF580C38RSK2-32
Memory generationDDR5
Form factorUDIMM
Capacity32 GB
Modules in kit2
Advertised memory data rate8000 MT/s; profile and platform support must be checked
Memory module height39.2 mm

Listed speed is a tested memory profile, not guaranteed default speed. Check the exact kit SKU against the motherboard QVL, CPU memory limits, BIOS version and cooler clearance. The manufacturer PDF description contains a per-module capacity typo; the heading, total kit capacity and 2G x 64-bit organization identify this as 2 × 16 GB.

Catalog record checked . Manufacturer specifications. The individual references below show the dates used for these model notes.

A different choice worth checking

Kingston FURY Beast 32GB DDR5-6400 CL32The 32 GB DDR5-6400 CL32 Beast kit is worth comparing when the platform has clear support for that profile and you want to evaluate memory tuning deliberately. Its capacity remains 32 GB, so it does not fix swapping caused by an oversized workload. A stable lower-speed kit with enough capacity can be the more useful purchase than a higher number that needs extensive adjustment.Read this model’s tradeoffs ↗Kingston FURY Renegade 48GB DDR5-7200 CL38This Renegade kit sits between common 32 GB and 64 GB capacities while targeting a DDR5-7200 profile. It can be attractive when 48 GB is enough for the workload and the exact platform has suitable validation. Separate those two reasons to buy: you may benefit from more memory while gaining little from the higher data rate, or need a lower profile for stability.Read this model’s tradeoffs ↗Kingston FURY Beast 32GB DDR5-6000 CL30Decide whether 32 GB meets your workload first. Then verify the exact kit on the intended board and check cooler clearance. Buying a faster profile is not a substitute for identifying why the current PC slows down.Read this model’s tradeoffs ↗

These alternatives address related choices. Recheck their platform, connections and fit before treating one as a replacement.

Follow the check that matters to your build

Sources and review notes

RigAtlas connects manufacturer specifications to component choices. This page is document-based analysis; it does not claim a hands-on test or a current store offer.

How we use sources · Report a correction

See how it fits your list.

Review this component with your existing selections before making the change.

Check with my build