RigAtlas
My builds

Memory · MODEL NOTES

Kingston FURY Beast 32GB DDR5-5600 CL36

A capacity-first DDR5 kit with both platform profile options

Check with my buildRead the specifications ↓
The decision

The 32 GB DDR5-5600 CL36 FURY Beast kit is worth comparing when 32 GB is the useful upgrade and chasing a higher profile is not the priority. Its two 16 GB modules and relatively short body are convenient for a conventional tower. Compare exact QVL support and delivered cost with the 6000 CL30 kit; a headline data rate alone does not tell you which configuration is more reliable.

Consider it when

  • A DDR5 desktop prioritizing adequate capacity and a supported two-module configuration.

Look again when

  • Your measured workload needs 64 GB, or the kit lacks support on the selected board.

THE SPACE IT NEEDS

Check the space under the cooler

34.9 mmPublished height
Original dimension guide. The primary dimension is scaled; other geometry is schematic.
Memory module height
34.9mm

Compare the module height with the cooler’s documented RAM clearance. A raised cooler fan may also need more space below the case side panel.

Check cooler and RAM clearance ↗

Based on the manufacturer specification record, checked . Check the exact revision and installation instructions before buying.

The checks that can change your choice

Confirm KF556C36BBEK2-32 rather than a similar Beast kit

This code records both AMD EXPO and XMP 3.0, 5600 CL36 and 34.9 mm height. Other FURY Beast kits have different profiles and capacities. Verify the exact code and use supported settings rather than copying the voltage or timings from a faster family member.

Validate the kit, then the profile

Use the exact kit code in the board’s memory support list and install the matched modules in its recommended slots. First establish a stable default boot, then enable the supported profile and test memory. Mixing separate kits is not equivalent to buying one validated larger kit.

Published specifications

32 GB (2 × 16 GB); DDR5-5600 CL36; AMD EXPO and XMP 3.0; 34.9 mm height; KF556C36BBEK2-32.

BrandKingston
Exact modelFURY Beast 32GB DDR5-5600 CL36
SKU / part numberKF556C36BBEK2-32
Memory generationDDR5
Form factorUDIMM
Capacity32 GB
Modules in kit2
Advertised memory data rate5600 MT/s; profile and platform support must be checked
Memory module height34.9 mm

Listed speed is a tested memory profile, not guaranteed default speed. Check the exact kit SKU against the motherboard QVL, CPU memory limits, BIOS version and cooler clearance.

Catalog record checked . Manufacturer specifications. The individual references below show the dates used for these model notes.

A different choice worth checking

Kingston FURY Beast 32GB DDR5-6000 CL30Decide whether 32 GB meets your workload first. Then verify the exact kit on the intended board and check cooler clearance. Buying a faster profile is not a substitute for identifying why the current PC slows down.Read this model’s tradeoffs ↗CORSAIR VENGEANCE 32GB DDR5-6000 CL30This VENGEANCE kit is a sensible 32 GB comparison point when two 16 GB modules cover the workload and the board supports the exact CMK32GX5M2B6000Z30 code. Its 35 mm height can simplify a tower-cooler layout. Choose it for capacity, fit and a validated configuration; the advertised 6000 MT/s is a profile target rather than the speed every machine will select automatically.Read this model’s tradeoffs ↗Kingston FURY Beast 64GB DDR5-6000 CL30The 64 GB FURY Beast kit is most relevant when real project sizes or concurrent workloads exceed what a 32 GB system can comfortably hold. It provides two 32 GB modules rather than requiring four smaller modules. That makes a clean capacity plan, but the memory controller still has to support those modules and the selected profile; do not infer stability from a smaller kit’s result.Read this model’s tradeoffs ↗

These alternatives address related choices. Recheck their platform, connections and fit before treating one as a replacement.

Parts lists using this exact model

These lists show the surrounding components and the tradeoffs. They are editable planning examples, not measured systems.

Follow the check that matters to your build

Sources and review notes

RigAtlas connects manufacturer specifications to component choices. This page is document-based analysis; it does not claim a hands-on test or a current store offer.

How we use sources · Report a correction

See how it fits your list.

Review this component with your existing selections before making the change.

Check with my build