RigAtlas
My builds

Storage · MODEL NOTES

WD_BLACK SN7100 2TB

The SN7100 2TB is the storage choice shared by the two featured Radeon lists. Its main contribution to those examples is a defined amount of storage; moving from one CPU or GPU tier to another does not add any drive space.

Check with my buildRead the specifications ↓
The decision

Choose it after checking your library, project files and available M.2 socket. A fast specification cannot make a nearly full drive larger or give an incompatible socket NVMe support.

Consider it when

  • Your files, operating system and planned applications fit a 2 TB storage plan with room for updates and working files.
  • The motherboard has an available 2280 NVMe socket and you have checked which existing ports or lanes it shares.

Look again when

  • Your only free storage connector is SATA, or the available M.2 socket accepts SATA drives only.
  • You are choosing it solely from a sequential-speed number while your main requirement is capacity, sustained writes or a particular application workload.

The checks that can change your choice

Check the full capacity and format

The 2 TB model is WDS200T4X0E, an M.2 2280 PCIe Gen4 x4 NVMe drive. Capacity is stated in decimal units; formatting and the operating system affect the space shown to you. Keep backups separate from the working drive.

Check the manufacturer document ↗

Choose the socket before installing the GPU

For example, B650 GAMING PLUS WIFI accepts this 2280 NVMe format in either storage socket. Check the installed CPU and lane notes, then fit the drive and any specified motherboard heatsink before a large graphics card blocks access.

Check the manufacturer document ↗

Do not turn an upper speed into a promise

The datasheet lists up to 7,250 MB/s sequential read for the 2 TB model. That is not an application loading time or a sustained-write guarantee. Compare workload-specific tests if that behaviour is the reason for replacing a working SSD.

Check the manufacturer document ↗

Published specifications

2 TB; M.2 2280; PCIe 4.0 x4 NVMe; without an integrated heatsink; WDS200T4X0E.

BrandWD_BLACK
Exact modelSN7100 2TB
SKU / part numberWDS200T4X0E
Form factorM.2 2280
Capacity2000 GB
Storage connectionPCIe 4.0 x4 NVMe

Capacity is manufacturer decimal capacity. Check the exact SKU, M.2 slot protocol, lane sharing and cooling requirements; regional availability is not guaranteed.

Catalog record checked . Manufacturer specifications. The individual references below show the dates used for these model notes.

A different choice worth checking

WD_BLACK SN850X 2TBThe SN850X 2TB is a candidate for a main or working drive when both capacity and workload behavior matter. It belongs in a comparison with the 990 PRO and T500, using relevant evidence and the actual installed price. The gaming-oriented branding does not establish a frame-rate improvement or eliminate the need to check where the SSD sits beneath a hot graphics card.Read this model’s tradeoffs ↗Samsung 990 EVO Plus 2TBThe 990 EVO Plus 2TB is a capacity-focused NVMe alternative for a general desktop or active library. Its interface can use PCIe 4.0 x4 or PCIe 5.0 x2, so it should not be compared with a Gen5 x4 drive solely by generation number. Check whether the application actually needs a premium transfer-focused drive before spending more than this storage role requires.Read this model’s tradeoffs ↗Crucial T500 2TBThe T500 2TB is worth comparing when a 1 TB working drive is cramped but the build does not need a Gen5-specific storage setup. It can keep the operating system and active files on one NVMe device, or serve as a dedicated project drive beside an existing boot SSD. Choose between those layouts based on recoverability and workflow, not an assumption that two drives are automatically faster.Read this model’s tradeoffs ↗

These alternatives address related choices. Recheck their platform, connections and fit before treating one as a replacement.

Parts lists using this exact model

These lists show the surrounding components and the tradeoffs. They are editable planning examples, not measured systems.

Follow the check that matters to your build

Sources and review notes

RigAtlas connects manufacturer specifications to component choices. This page is document-based analysis; it does not claim a hands-on test or a current store offer.

How we use sources · Report a correction

See how it fits your list.

Review this component with your existing selections before making the change.

Check with my build